Petzl PRO TRAXION Pulley

$135.00

Petzl PRO TRAXION Pulley

A very efficient loss-resistant progress capture pulley, the PRO TRAXION progress capture pulley is designed to allow rope installation while the pulley is connected to the anchor. With its large diameter sheave and great efficiency, it is particularly appropriate for hauling heavy loads. The side plate locks when loaded and prevents opening of the pulley during use. The lower connection point can be used to create different types of hauling systems.

  • Weight: 265 g
  • Certification(s): CE EN 567, NFPA 1983 Technical Use, EAC
  • Material(s): aluminum, stainless steel, nylon
  • Min. rope diameter: 8 mm
  • Max. rope diameter: 13 mm
  • Sheave type: sealed ball bearings
  • Sheave diameter: 38 mm
  • Maximum working load: 2 x 2,5 = 5 kN
  • Breaking strength - pulley: 11 kN x 2 = 22 kN
  • Maximum working load - rope clamp: 2.5 kN
  • Breaking strength - rope clamp: 4 kN
  • Efficiency: 95 %

Write a review

Note: HTML is not translated!
Bad           Good